10 inspector i jobs found

Wastewater Treatment Lab Analyst-Environmental Compliance Inspector I Salary: $53,749.23 - $68,602.30 Annually   Overview Under general supervision, plans, organizes and conducts a variety of water pollution laboratory tests and analyses necessary for the waste water treatment plant to remain in compliance with state and federal mandates; operates and inspects the laboratory and maintains a quality level which is within EPA guidelines; performs other related duties as required.  Primary Responsibilities The Wastewater Treatment Lab Analyst/Inspector I is an entry level class responsible for a wide variety of preventative maintenance and waste water analytical testing. Inspects industrial and commercial businesses for compliance with City pretreatment and waste water discharge permits. Incumbents in this class must work independently in the performance of assigned duties. This classification is distinguished from the Wastewater Treatment Lab Analyst/Inspector...

NOTICE TO APPLICANT This position will close at 12:00AM MST on the End Date. You must ensure your application reflects the correct and current information for your work experience, hours worked per week per position, education, personal information, etc. Only the information provided on this application is evaluated when determining compensation. WRITTEN AND PHYSICAL AGILITY TEST WILL BE ADMINISTERED Basic- Classified Status Employee. (MIN $29.67/Hr. - $61,711.50/Yr - MAX $41.75/Hr. - $86,834.27/Yr) Intermediate- Classified Status Employee. (MIN $31.26/Hr. - $65,011.50/Yr - MAX $43.33/Hr. - $90,134.27/Yr) Paramedic- Classified Status Employee. (MIN $33.27/Hr. - $69,211.50/Yr - MAX $45.35/Hr. - $94,334.27/Yr) **An Individual whose qualifications exceed the minimum qualifications for the job may be hired above the minimum of the range based on full years of related work experience as presented on the application**           Job Description PURPOSE SUMMARY....

AESC - Lead Facilities Inspector - HVAC Post-Hire Training Recruitment # RE-200-01 Company AESC Date Opened 10/10/2024 08:00:00 AM Filing Deadline 12/8/2024 11:59:00 PM Location Florence, SC Go Back   Apply Introduction   is assisting with the recruitment and training for         About AESC US LLC  AESC is a global leader in the development and manufacturing of high-performance batteries for electric vehicles and energy storage systems. The company's leading-edge technology and reliability are enabling and accelerating the transition to clean energy solutions. Through rapid expansion, AESC batteries will soon power more than 1,000,000 electric vehicles for the world's top automakers. AESC is headquartered in Japan and has battery manufacturing locations in Japan, China, UK, France, Spain, and the U.S.   AESC Mission Our mission is to solve the challenges for a sustainable future....

Job Posting: Mechanic I - 955 City of Columbia, MO - Public Works Department Job Code: 02107 | FLSA Status: Non-Exempt | Union Code/Affiliation: Local 955 | Division: VEHICLE MAINTENANCE Job Description Summary: The City of Columbia is actively seeking skilled and dedicated individuals for the position of Mechanic I in the Public Works Department. As a Mechanic I, you will play a crucial role in servicing, diagnosing, and repairing city vehicles and equipment to ensure their safe working condition. Essential Duties and Responsibilities: Services, diagnoses, and repairs city vehicles and equipment to maintain safe working condition. Conducts and documents motor vehicle inspections for all city equipment, ensuring accurate records are maintained. Adheres to proper safety protocols. Assists fleet personnel and other departments as needed. Maintains knowledge of current technology. Regular attendance is a necessary and essential function. Performs...

HQC Incorporated Plastic Injection Molding Making parts for Food, Medical & Personal care items.   37 years in Business Clean Modern Manufacturer     Quality Assurance Inspectors - 2nd Shift Wages $17.50 and Up   Inspector/Packers - 3rd shift $17.50   Full Time Office Assistant $17.00 & Up   3rd shift Injection Molding Technician Experience needed Pay depends on experience   3rd shift Supervisor Experience needed Wage depends on experience     Benefits for full time Insurance, Paid Holidays, Paid Time Off Paid Vacation, 401(k) with up to 4% company match Tuition Reimbursement   Shift Times                                 1 st:  6:45a-3:15p 2 nd:  2:45p-11:15p 3 rd:  10:45p-7:15a     Submit application or resume M-F 7:30a-4:30p or email to  employment@hqcinc.com   HQC Inc., 230 Kendall Point Drive, Oswego, IL 60543 (630) 820-5550   Visit us online at:...

Building Inspector II Position Profile   Deadline to Apply:  December 6th, 2024, at 8:30am Interviews (virtual):  within a week of application (if selected) Final Interviews (in-person):  Early December 2024 Pre-Employment Process:  Mid-Late December 2024 Expected Start Date:  Early February 2025   Details Full-Time, Non-Exempt $39.14 $50.87 per hour depending upon qualifications (2024 rates) Benefit Eligible Date of Hire Reports to Building Inspections Manager Located at Eden Prairie City Center (8080 Mitchell Road Eden Prairie, MN 55344), travels to inspection sites. Typical hours are 8:00 a.m. to 4:30 p.m.; varies based on business need   Responsibilities The Building Inspector II supports the Building Division to ensure standards are established by the code to safeguard, life, limb, health, property, and public welfare in the City of Eden Prairie are complied. The primary position responsibilities and areas of...

Assembler I / Welder I Shift:  5:00 am – 3:30 pm   Monday – Thursday    Overtime required. KEITH Walking Floor Systems provide horizontal loading/unloading solutions for bulk materials, pallets, bales and rolls. The company’s state of the art production facility in Madras, Oregon operates using Lean Manufacturing practices. We are seeking high performance team members with a commitment to quality work with a positive attitude.   Submit your completed application at keithwalkingfloor.com/current openings   Responsibilities include assembling components and hardware in a prescribed manner using power or hand tools, testing devices, gauges, and other equipment.  Tack-weld or weld components and assemblies using welding equipment. Understands proper quality weld standards (including slag removal.) Read and follow specified layouts, procedures, and operating charts. Read and interpret blueprints and or drawings to determine the specific welding requirements. Perform...

AESC - Maintenance Technician Post-Hire Training Recruitment # RE-200-03 Company AESC Date Opened 11/13/2024 10:00:00 AM Filing Deadline 2/11/2025 11:59:00 PM Location Florence, SC Introduction   is assisting with the recruitment and training for         About AESC US LLC  AESC is an exciting, newly created global organization committed to solving the challenges of a sustainable future and becoming the leading supplier of full-value-chain battery solutions. Our lithium-ion batteries can be found in more than 850,000 electric vehicles worldwide and have a stellar safety record of zero-critical issues. We will continue to build upon our successes and expand into new markets and industries, producing innovative and competitive products and technologies that advance the goal of a zero-carbon emission future. AESC is headquartered in Japan and has battery manufacturing locations in Japan, UK, and the...

Cabinet Maker III Fabricating and installing cabinet components and hardware. Mark outlines or dimensions of parts, according to blueprints or drawing specifications Cutting 45-degree miters on aluminum and anodized trim Adhering laminate to the substrate with contact adhesive  Final assembly of parts and hardware Assembler I Installing and mounting nonelectrical and electrical interior/exterior components and hardware Assemble fabricated parts, components, or other units at stations Reading blueprint and engineering specifications Ensure safety requirements and manufacturing quality are met Clean and inspect the product for quality standards Installer I Installation of all electrical interior/exterior components and hardware  Understand and carry out verbal and written directions in English  Close attention to detail Function with a minimal amount of supervision or no supervision. Set work priorities to meet production goals as scheduled. Assist in training installers at all...

About NYCREATES: NY Creates is a leading research and development hub as well as a commercialization facilitator in advanced digital, analog, and power technologies. Job Description: Clean Room Operator Level I duties assigned will include but will not be limited to: Operating equipment in various semiconductor process areas such as photolithography, etch, wet cleans, CVD, PVD, CMP, metrology and others. Write and update operating procedures as needed. Perform inspection, test, minimal repair, troubleshooting and operation of several process tools or tool clusters of a complex nature. May be involved in new tool installation, troubleshooting, and qualification. Will provide technical assistance to operations management and resolve tool problems. Must exhibit self-discipline and be able to work under minimal supervision. Support peak workload periods, recognize and correct any errors or deficiencies. Correct improper operation of equipment and will take...